PR 18-1.5 V2

Hydraulic tube 18x1.5 1.4541

The product image may differ

Ø d1

18 mm

1.5 mm

Specific load I

220 bar

Descarregar PDF

Selecione uma versão

Exibir tabela de artigos

PR 04-1 V2 PR 06-1 V2 PR 06-1.5 V2 PR 08-1 V2 PR 08-1.5 V2 PR 10-1 V2 PR 10-1.5 V2 PR 10-2 V2 PR 12-1 V2 PR 12-1.5 V2 PR 12-2 V2 PR 14-1 V2 PR 14-2 V2 PR 14-2.5 V2 PR 15-1 V2 PR 15-1.5 V2 PR 15-2 V2 PR 15-2.5 V2 PR 16-1 V2 PR 16-1.5 V2 PR 16-2 V2 PR 18-1 V2 PR 18-1.5 V2 PR 18-2 V2 PR 18-2.5 V2 PR 18-3 V2 PR 20-1 V2 PR 20-1.5 V2 PR 20-2 V2 PR 20-2.5 V2 PR 20-3 V2 PR 20-4 V2 PR 22-1 V2 PR 22-1.5 V2 PR 22-2 V2 PR 22-2.5 V2 PR 22-3 V2 PR 25-2 V2 PR 25-2.5 V2 PR 25-3 V2 PR 25-4 V2 PR 28-1 V2 PR 28-2 V2 PR 28-2.5 V2 PR 28-3 V2 PR 28-4 V2 PR 30-1.5 V2 PR 30-2 V2 PR 30-2.5 V2 PR 30-3 V2 PR 30-4 V2 PR 32-1.5 V2 PR 32-2 V2 PR 34-2 V2 PR 35-1.5 V2 PR 38-2 V2 PR 38-3 V2 PR 38-4 V2 PR 38-5 V2 PR 40-1.5 V2 PR 42-2 V2 PR 42-3 V2 PR 54-2 V 2

Detalhes do produto sobre

PR 18-1.5 V2

Ø d1

18 mm

1.5 mm

Specific load I

220 bar

Specific load III

166 bar

Ø d2

15 mm

AD tolerance +/-

0.08 mm

ID tolerance +/-

0.08 mm

Todas as propriedades

Propriedades

Construction type

precision steel tube, seamless, (cold-drawn), metric

Design

metric

Material

stainless steel X6CrNiTi18-10 (1.4541 / AISI 321)

Material condition

CFA = bright annealed (annealed, metallically bright)

Standard

DIN EN 10216-5

Tube length

5 to 7 metres*.

Customs tariff number

73044100

Todas as propriedades

Product description

Avisos

The pressure figures are based on straight tubes.
The appropriate wall thickness needs to be calculated for tubes with bends as stipulated in DIN EN 13480-4.
*Stainless steel tubes are supplied in manufactured lengths according to EN 10216-5. In terms of production, these are usually 6 meters (+/- 1m). Order quantities are rounded to the nearest possible total length, without cutting.

Descrição

The stainless steel pipes made of materials 1.4301 / AISI 304 (V1), 1.4541 / AISI 321 (V2) and 1.4571 / AISI 316Ti (V4) are supplied in CFA condition (bright annealed) as standard. This condition offers very good bendability and is the established standard in the hydraulics sector, particularly for the installation of pipelines.
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.

Informações adicionais

Calculation analog DIN 2413
Specific load I: static (up to 120 °C)
Load case III: dynamic (up to 120 °C) stress range = P bar
Strength parameter: K 222 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 225 [N/mm²]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
Elastic strength to DIN DIN 10216-5 Rp 1.0 to 50°C
The fatigue strength value was reduced in relation to the strength parameter by 1.4571.

Aviso sobre encomendas

Other delivery conditions, such as CFD, are available on request and must be specified separately.